suitable as level limiting switch in conductive fluids

Input: conductivity Medium: non aggressive fluids Fitting length: up to 200 mm Process connection: several options Electrical connection: several options Material body: stainless steel 1.4571 Material insulator: Teflon Output: 1 electronic changeover contact or conductivity Degree of protection: IP67

suitable as level limiting value switch or level sensor

Level: 100...6000 mm Medium: non aggressive fluids Option: with RTD Pt100, 2-wire Process connection: several options Electrical connection: several options Material: stainless steel 1.4571 Output: 4...20 mA / contacts Degree of protection: IP67

compact electronics, suitable for
installation in level sounds

For direct and alternating voltage supply 21...250VAC or 20...200VDC Integrated safety circuit Continuous capacity calibration Potential free relay output Status indication by LED

For level limit detectionn (minimum or maximum level signal)
in silos with bulk goods

For bulk goods with relative dielectric constant >2,5) Range of temperature for medium: 0...+400°C Voltage supply: 21...250 V AC/DC Output: 1 potential free change over contact Process connection: DIN flange DN100 Nearly no wear and maintenance free Mounting: all silos and hoppers