For use in all ranges where weigths have to be measured,
e.g. monitoring screw preload, deep-draw pressing force,
fork lift truck overload or failsafe cable tension.

Nominal load: 10 kN up to 200 kN Output: strain gauge full bridge, 1 mV/V Voltage supply: 10 VDC Accuracy: +/- 0,5% of range Temperature range: -20...+80 °C Safe overload: 150% of nominal range Material: stainless steel ARMCO 17-4PH Protection: IP66 Connection: 3 m cable

The force transducer is suitable for retrofitting in SERAPID
lift and transport systems with LinkLift series

Ranges: 20 / 30 / 70 / 100 kN Output: 0,5...1 mV/V Combined error: 2,5% of range Protection: IP67 Material: stainless steel ARMCO 17-4PH Safe overload: 150% of range Operating temperature: -20...+70 °C Connection: plug M12, 5-pole

For use in transport applications to measure wheel- and axle load.
With display, due to low profile it's easy to handle

Ranges: 10 t / 20 t / 40 t Output: 1mV/V or display Voltage supply: 5...15 VDC (bridge) Combined error: 0,5...5% of range Protection: IP66 Material: aluminium alloy, steel Overload: 120...150% Operating temperature: -20...+60 (80) °C

with double shearing load transducer in compact functional style,
suitable for silos, tanks, hoppers and plattform scales

Ranges from 1 t up to 75 t Output 2mV/V Supply voltage 10VDC Accuracy below 0,05% of and scale value Degree of protection IP68 Insensitive to off axis loads Highly accurate and reliable optioanally made of stainless steel

for tension and pressure load, suitable for weighing
measurement in harsh suuroundings

Rated load: 5...500kg Output: 2mV/V Supply voltage: 10VDC Accuracy: +/- 0,02% of end scale value Degree of protection: IP67 Material: alloy steel / stainless steel Connection: 3 m cable, 4-wire

Resistance strain gauge sensor element, S-shaped,
for force and pressure measurement

Standard capacity from 100kg (250lb) to 5000kg (20klb) S-shaped tension load cell for simple mounting High alloy tool steel, nickel plated or stainless steel design Particularly suitable for parallel connection Optimal cost-performance ratio Degree of protection IP66 Accuracy 0,02% end of scale value

for eccentrical weight, suitable for small electronic
plattform scales and electronic price-counting scales

Rated load 50kg up to 300kg Output 2mV/V Supply voltage 10VDC Accuracy +/- 0,02% of end scale value Degree of protection IP67 Recommended plattform size 400 x 400mm High resistance to lateral loads Highly accurate and reliable

Suitable for vehicle weighers, platform scales, theatre technics,
hoppers and other electronic weighing devices

Material: alloy steel / stainless steel / aluminium alloy Rated load: 20...10000 kg Output: 2 mV/V Supply voltage: 10 VDC Accuracy: +/- 0,02% FS Degree of protection: IP66 / IP67 Connection: 3 m / 6 m cable, 4-wire shielded

Sensor element: resistance strain gauge for simple mounting
and application for force measurements

Force measurement in existing installations without mechanical modification Ranges 0...100kg up to 0...2000t Output full-bridge resistance strain gauge or 0...10V, 0(4)...20mA Degree of protection IP65, optional up to IP68 Output is temperature linear Accuracy up to 0,1% of end scale value Every dimension available

Compression load sensor for use in electronic vehicle scales, track scales,
hoppers, silos and terotechnology

Nominal load: 0,1 t up to 30 t Output: strain gauge full bridge, 2 mV/V Voltage supply: 9...12 VDC Accuracy: +/- 0,2% of range Temperature range: -20...+55 °C Safe overload: 120% of nominal range Material: alloy steel Protection: IP66 Connection: 3 m cable

Compression load sensor for use in electronic vehicle scales, track scales,
hoppers, silos and terotechnology

Capacity 1 kN up to 1000 kN Output strain gauge full bridge, 2 mV/V Supply voltage 10 VDC Accuracy +/- 0,1% of end scale value Degree of protection IP67 Low height Application of force with adaptor Connection with cable MIL-plug, Cannon-plug, RSF4-plug

with integrated strain gauge sensor element, for the measurement
of cable tension and under hook crane / lifting gear weighing

Ranges from 1t up to 500t For use with standard lifting shackles Distance 200m Auto power down Up to 255 links can be used Accuracy 0,2% of end scale value Degree of protection IP67 (load cell) respectively IP65 (hand held display) Robust constuction