Single or double amplifier for connection of maximum 4 strain gauge bridges,
with display, easy to adjust

Input: up to 4 strain gauge full bridges Input sensitivity: 0,1...5 mV/V Analog output: 4...20 mA / 0...10 V Voltage supply: 24 VDC +/-30% Resolution: 12 / 14 / 15 / 16 bit Combiened error: 0,2% of end scale value Optionally: limit value switch / interface / vibration protection Degree of protection: IP65 Adjustment: via RS232 interface

Double amplifier for connection of 2 strain gauge bridges,
with display, programmable, for service

Input: 2 strain gauge full bridges Input sensitivity: 0,1...5 mV/V Analog output: 4...20 mA / 0...10 V Voltage supply: accumulator Resolution: 12 / 14 / 15 / 16 bit Combiened error: 0,2% of end scale value Degree of protection: IP54 Adjustment: via RS232 interface or programming keys

Measuring amplifier in top hat rail enclosure with analogue outputs
and serial interface. Suitable for nearly all ranges of laod/force measuring

Input sensivity 01 to 5 mV/V Programmable via RS232 interface Analog output 4...20 mA and 0...10 V Supply voltage 24 VDC +/- 30% Combiend error 0,2% FS Resolution 12 / 14 / 15 / 16 bit Enclosure plastics Degree of protection IP 67

For connection of maximum 6 strain gauge full bridges
with 4 or 6 wires

Input: 6 strain gauge full bridges Output: 1 strain gauge summing-up signal Sensors: 4- or 6-wires Bridge supply: out of amplifier or internally Supply: 12...30 VDC VDC (optionally) Cascade circuit possible Connection: screwed pin and socket, lockable Cable entries: 7 pcs M16x1,5

in top hat rail case for all weighing-technical applications

Input sensitivity (0,1 mV/V up to 4 mV/V) selectable by DIP-switches Connection of max. 4 resistance strain gauge sensors (full bridge, 350 ohms) Change over analog output 0 (4)...+/- 20 mA or 0 (2)...+/-10 V Sensor supply voltage internally continiously adjustable (4...14 V) Optionally 2 adjustable limit value switches (potential free change over contacts) Accuracy +/-0,1% of end of scale value Supply voltage 115/230 VAC or 24 VAC/DC

in field case for all weighing-technical applications

Input sensitivity (0,1 mV/V up to 4 mV/V) selectable by DIP-switches Connection of max. 4 resistance strain gauge sensors (full bridge, 350 ohms) Change over analog output 0 (4)...+/- 20 mA or 0 (2)...+/-10 V Sensor supply voltage internally continiously adjustable (4...14 V) Accuracy +/-0,1% of end of scale value Supply voltage 115/230 VAC or 24 VAC/DC, galvanic separation

in tube shaped case for interface adaption
between sensor and control

Input sensivity 01 to 5 mV/V Programmable via RS232 interface Analog output 4...20 mA and 0...10 V Supply voltage 24 VDC +/- 30% Combiend error 0,2% FS Resolution 12 / 14 / 15 / 16 bit Enclosure stainless steel Degree of protection IP 67

in robust field case for all weighing-technical applications

4 inputs resistance strain gauge, full bridges Addition of single measure values 1 output for connection to every measuring amplifier with input for resistance strain gauge bridges Cascading of several summing amplifiers is possible External power supply for the bridges can be connected on demand